Click To Call

Equipment is Our Product, Service is Our Business

Keep your machines working at full force this winter

  • Avoid permanent damage by identifying potential problems now
  • Prevent 2 a.m. breakdowns while clearing snow

Don’t let the cold slow you down and ensure your equipment is ready for cold weather operation with a winter inspection from Luby Equipment.

Winter inspection includes

• Flush radiator and refill to proper freeze point, inspect radiator hoses
• Check for water: chain cases, final drives, swing gear baths, & gear boxes
• Add proper fuel conditioner additive for winter
• Check fuel filter & water separator for service
• Verify proper operation of cold start aids
• Assess condition of block heater if equipped
• Inspect lights and wipers
• Load test battery & clean battery terminals
• Examine heater hoses & heater core
• Inspect defrosters, cab air flow, & cab air filters
• Recommend proper grade lubricants for winter
• Inspect cutting edges and teeth
• Check tension and belt wear
• Inspect air pre-cleaners
• Test backup alarms
• Check tires

After a thorough review of your machine, Luby Equipment will provide an estimate for any recommended repairs.
Schedule your Winter Inspection today!
© Luby Equipment. All Rights Reserved.
Created by Winsby Inc.


    Crawler Dozers

    Model Net HP Operating Weight Pad Width Blade Width Day Week 4 Weeks
    650M 68 HP 15,803 lb 24" 90" $400 $1,330 $3,600
    750M 92 HP 20,040 lb 28" 96" $500 $1,650 $4,500
    850M 112 HP 21,980 lb 28" 104" $600 $2,000 $5,400
    1150M 127 HP 31,134 lb 30" 120" $725 $2,175 $6,525
    1650M 150 HP 37,756 lb 34" 130" $825 $2,675 $7,425
    2050M 214 HP 45,414 lb 36" 135" $1,100 $3,650 $9,900

    Extra long track, wide track, and low ground pressure models available.

    Skid Steer Loaders
    Model Net HP Operating Weight Rated Operating Capacity* Available Bucket Widths Day Week 4 Weeks
    SR130 49 HP 5,070 lb 1,300 lb 66" - 84" $185 $550 $1,650
    SR160 60 HP 5,510 lb 1,600 lb 66" - 84" $185 $550 $1,650
    SR175 67 HP 6,270 lb 1,750 lb 66" - 84" $185 $550 $1,650
    SR175 HF 67 HP 6,270 lb 1,750 lb 66" - 84" $200 $600 $1,800
    SV185 60 HP 6,570 lb 1,850 lb 66" - 84" $215 $725 $1,950
    SV185 HF 60 HP 6,570 lb 1,850 lb 66" - 84" $225 $675 $2,025
    SR210 74 HP 6,970 lb 2,100 lb 66" - 84" $275 $970 $2,475
    SR210 HF 74 HP 6,970 lb 2,100 lb 66" - 84" $300 $1,050 $2,700
    SR240 74 HP 7,400 lb 2,400 lb 66" - 84" $285 $1,000 $2,495
    SR240 HF 74 HP 7,400 lb 2,400 lb 66" - 84" $310 $1,125 $2,775
    SR270 90 HP 8,117 lb 2,700 lb 70" - 84" $295 $1,050 $2,495
    SR270 HF 90 HP 8,117 lb 2,700 lb 70" - 84" $325 $1,150 $2,760
    SV280 74 HP 8,090 lb 2,800 lb 70" - 84" $295 $1,050 $2,495
    SV280 HF 74 HP 8,090 lb 2,800 lb 70" - 84" $325 $1,150 $2,775
    SV340 90 HP 9,100 lb 3,400 lb 70" - 84" $310 $1,050 $2,525
    SV340 HF 90 HP 9,100 lb 3,400 lb 70" - 84" $335 $1,150 $2,795

    SR = Radial Lift, SV = Vertical Lift, HF = High Flow • Machines equipped with smooth or tooth bucket • See page 7 for attachments

    Compact Excavators
    Model Operating Net HP Weight Max Dig Depth Day Week 4 weeks
    CX15EV 21 HP 3,186 lb 6' 9" $200 $580 $1,685
    CX17C 16.8 HP 3,910 lb 7' 3" $200 $580 $1,685
    CX26C 24.8 HP 5,520 lb 7' 11" $220 $605 $1,750
    CX30C 24.8 HP 6,020 lb 8' 2" $225 $650 $1,895
    CX33C 24.4 HP 7,110 lb 9' 11" $235 $685 $1,975
    CX37C 24.4 HP 7,990 lb 10' 3" $250 $750 $2,250
    CX57C 66.9 HP 12,050 lb 12' 6" $270 $785 $2,275
    CX60C 64.7 HP 12,940 lb 11' 9" $280 $815 $2,355
    CX75C SR 55.2 HP 16,200 lb 13' 7" $375 $1,150 $3,495
    CX80C 55.2 HP 18,800 lb 13' 9" $400 $1,200 $3,600
    Model Net HP Operating Weight Max Dig Depth Day Week 4 weeks
    TB210R 11.7 HP 2,535 lb 5' 9” $200 $710 $1,800
    TB216 15 HP 3,902 lb 7' 10” $220 $725 $1,915
    TB230 24.4 HP 6,360 lb 9' 3” $225 $650 $1,895
    TB235-2 29.8 HP 7,650 lb 11' 2” $245 $700 $2,060
    TB240 35.8 HP 8,570 lb 11' 4” $260 $775 $2,250
    TB250-2 39 HP 11,288 lb 12' 5” $270 $795 $2,300
    TB260 47.6 HP 12,645 lb 12' 9” $280 $815 $2,355
    TB290 69.2 HP 18,630 lb 15' $400 $1,200 $3,600

    Zero tail swing
    TB280FR 69.2 HP 18,810 lb 14' 11” $400 $1,200 $5,600

    Tracked Excavators

    Model Net HP Operating Weight Max Dig Depth Day Week 4 Weeks
    CX130D 102 HP 29,131 lb 18' 3" $585 $1,705 $4,945
    CX145D SR 102 HP 52,100 lb 18' 1” $605 $1,750 $5,075
    CX160D 112 HP 38,400 lb 19' 11" $615 $1,775 $5,155
    CX210D 160 HP 48,859 lb 20' 1" $675 $1,975 $5,695
    CX210D LR 160 HP 48,973 lb 39' 4" $1,425 $4,150 $12,000
    CX245D SR 160 HP 56,900 lb 20' 1" $725 $2,100 $6,095
    CX250D 177 HP 56,909 lb 22' 8" $750 $2,185 $6,350
    CX250D LR 177 HP 63,523 lb 47' 9" $1,625 $4,700 $13,625
    CX300D 207 HP 67,271 lb 22' 9" $1,025 $2,965 $8,595
    CX300D LR 207 HP 67,271 lb 24' 5" $1,835 $5,325 $15,450
    CX350D 268 HP 82,485 lb 24’ 1" $1,150 $3,350 $9,725
    CX365E SR 205 HP 78,600 lb 21' 1" $1,150 $3,350 $9,725
    CX490D 362 HP 109,300 lb 25’ 4" $1,625 $4,700 $13,650

    SR = Short Radius, RT = Rubber Track, LR = Long Reach • Additional bucket rental add 15% of rate Available with hydraulic couplers or thumbs add 15%

    Compact Wheel Loaders

    Model Net HP Operating weight Max Heaped Bucket Capacity Day Week 4 weeks
    21F 58 HP 11,272 lb 0.92 yd³ $300 $900 $2,700
    21F XT 58 HP 10,979 lb 0.92 yd³ $300 $900 $2,700
    121F 64 HP 11,618 lb 1.05 yd³ $300 $900 $2,700
    121F XT 64 HP 11,067 lb 1.05 yd³ $300 $900 $2,700
    221F 74 HP 12,547 lb 1.2 yd³ $350 $1,050 $3,150
    221F HS 74 HP 12,547 lb 1.2 yd³ $350 $1,050 $3,150
    321F 74 HP 13,303 lb 1.3 yd³ $350 $1,050 $3,150
    321F HS 74 HP 13,303 lb 1.3 yd³ $350 $1,050 $3,150

    XT = Tool Carrier, HS = High Speed

    Wheel Loaders
    Model Net HP Operating Weight Max Heaped Bucket Capacity Day Week 4 Weeks
    521G 142 HP 24,035 lb 2.3 yd³ $495 $1,435 $4,165
    521G XT 142 HP 25,384 lb 2.3 yd³ $495 $1,435 $4,165
    521G XR 142 HP 24,572 lb 2.3 yd³ $495 $1,435 $4,165
    621G 162 HP 27,695 lb 2.7 yd³ $540 $1,565 $4,540
    621G XT 162 HP 29,076 lb 2.7 yd³ $540 $1,565 $4,540
    621G XR 162 HP 28,483 lb 2.7 yd³ $540 $1,565 $4,540
    721G 195 HP 32,492 lb 3.50 yd³ $615 $1,785 $5,175
    721G XT 195 HP 33,392 lb 3.50 yd³ $615 $1,785 $5,175
    721G XR 195 HP 32,851 lb 3.50 yd³ $615 $1,785 $5,175
    821G 230 HP 40,057 lb 4.25 yd³ $690 $2,000 $5,800
    821G XR 230 HP 40,648 lb 4.25 yd³ $690 $2,000 $5,800
    921G 255 HP 45,071 lb 4.75 yd³ $980 $2,850 $8,250
    921G XR 255 HP 45,651 lb 4.75 yd³ $980 $2,850 $8,250
    1021G 320 HP 55,282 lb 5.50 yd³ $1,240 $3,500 $10,450
    1021G XR 320 HP 58,711 lb 5.50 yd³ $1,240 $3,500 $10,450
    1121G 347 HP 61,650 lb 6.25 yd³ $1,500 $4,325 $12,550
    1121G XR 347 HP 63,443 lb 6.25 yd³ $1,500 $4,325 $12,550
    Fork Attachment $50 $150 $450

    XT = Tool Carrier, XR= Extended Reach • Quick couplers available, add 15%

    Rough Terrain Forklifts
    Model Type Operating Weight Capacity Reach Day Week 4 Weeks
    586H Standard 13,682 lb 6,000 lb 15' $275 $800 $2,350
    588H Standard 16,102 lb 8,000 lb 15' $300 $900 $2,700

    Breakers
    Model Carry Weight Minimum Carry Weight Maximum Flow Supply Day Week 4 Weeks
    HP500 3,750 lb 14,300 lb 8 - 16 g/m $205 $680 $1,850
    HP750 6,650 lb 17,600 lb 14 - 22 g/m $220 $730 $1,980
    HP1000 7,750 lb 23,100 lb 14 - 24 g/m $350 $1,050 $3,150
    HP1100 8,850 lb 26,450 lb 16 - 27 g/m $350 $1,050 $3,150
    HP1250 11,050 lb 30,850 lb 19 - 28 g/m $390 $1,170 $3,500
    HP1500 14,400 lb 35,200 lb 19 - 29 g/m $450 $1,375 $4,150
    HP2000 26,500 lb 48,500 lb 23 - 25 g/m $550 $1,670 $4,500
    HP3000 33,000 lb 55,000 lb 30 - 40 g/m $750 $2,250 $6,800
    HP4000 35,500 lb 61,500 lb 34 - 43 g/m $835 $2,670 $7,900
    HP5000 42,000 lb 70,500 lb 39 - 48 g/m $950 $2,850 $8,600
    HP5500 46,500 lb 83,500 lb 43 - 53 g/m $1,025 $3,065 $9,200
    HP7500 51,000 lb 92,000 lb 48 - 61 g/m $1,200 $3,600 $10,800
    HP8000 60,000 lb 110,000 lb 51 - 71 g/m $1,200 $3,600 $10,800

    Attachments for SSLs & CTLs

    Loader Attachments Standard Flow

    Description Day Week 4 Weeks
    Breaker 500 ft lb $205 $680 $1,845
    Breaker 750 ft 1b $250 $750 $1,900
    Brush Hog 72" - 80" $250 $875 $2,250
    Bucket - Extra $50 $150 $450
    Dozer Blade 80" or 96" $150 $525 $1,350
    Drop Hammer Cyclone 3,500 lb $275 $963 $2,475
    Grapple Root 72" - 82" $90 $315 $810
    Pallet Fork $50 $150 $450
    PWR Power Rake $250 $825 $2,250
    Scrap Grapple 72" - 78" $90 $315 $810
    Soil Conditioner/Preparator $150 $525 $1,350
    Trencher - 6" or 8" W x 48" D $170 $570 $1,550
    Tree Puller $75 $250 $725

    Loader Attachments High Flow
    Cold Planer - 24" Drum $450 $1,500 $4,050
    Cold Planer - 40" Drum $560 $1,870 $5,040

    Augers
    Auger Drives with Bit up to 24" $100 $300 $900
    Auger Extra Bits up to 24" $50 $175 $450
    Auger Extra Bits 30" to 36" $75 $265 $675
    Auger Extension Range - 8" to 36" $20 $60 $180

    Brooms
    Broom, Angle 84" $225 $700 $2,025
    Broom, Pickup 72" $225 $700 $2,025

    Single Drum Rollers
    Model Rated HP Operating Weight Drum Width Day Week 4 Weeks
    SV208D 99 HP 15,830 lb 66” $515 $1,495 $4,325
    SV210D 99 HP 19,538 lb 66” $540 $1,550 $4,550
    SV212D 154 HP 24,520 lb 84” $550 $1,595 $4,650
    SV216D 154 HP 31,640 lb 84” $575 $1,675 $4,850

    Available with dozer blade add 10% • Shell kits available add 20%

    Double Drum Vibratory Rollers

    Model Rated HP Operating Weight Drum Width Day Week 4 Weeks
    DV209D 100 HP 21,080 lb 71” $505 $1,465 $4,250
    DV210D 100 HP 22,930 lb 71" $535 $1,550 $4,500

    Trench Roller
    Model Rated HP Operating Weight Capacity Drum Width Day Week 4 Weeks
    RTLx-SC3 16 HP 3,020 lb 2,400 lb 32.0" $225 $675 $2,200

    Mud Buggies
    Model Weight Volume Load Capacity Day Week 4 Weeks
    MB 1600 Tire 1,370 lb 16 ft³ 2,500 lb $75 $275 $725
    MBTX 2500 Track 1,640 lb 16 ft³ 2,500 lb $150 $525 $1,375

    Machine Control Systems
    Model Day Week 4 Weeks
    LMR240 $50 $75 $200
    LMR360 $100 $125 $375
    DM200 $100 $125 $375
    CoPiIot $150 $300 $500
    iCON Grade iGD2, 2D system $575 $1,450 $3,300
    iCON Grade iGD3, 3D system $625 $1,600 $3,600
    Base Station & Rover Jobsite Setup $750 $2,000 $4,000

    (one month minimum)

    Lasers

    104" Model Distance Day Week 4 Weeks
    Rugby Beam Laser 3,000' $80 $200 $600
    Rugby Grade Laser 2,500' $50 $150 $450

    Loader Backhoes
    Model Net HP Operating Weight Max Dig Depth Day Week 4 Weeks
    580EP 74 HP 15,795 lb 18'6" $300 $825 $2,275
    580N 90 HP 16,589 lb 18'3" $325 $895 $2,450
    580SN 97 HP 17,269 lb 17'11" $345 $950 $2,600
    580SN WT 97 HP 20,077 lb 18' $365 $1,000 $2,760
    590SN 110 HP 20,532 lb 19'6" $380 $1,045 $2,875

    All units equipped with cab heater and A/C, X-hoe, 4 wheel drive, ride control, manual quick coupler, and auxiliary hydraulics


    Backhoe attachments

    Model Day Week 4 Weeks
    Additional Bucket Rental $50 $150 $450
    Auger and Bit $100 $300 $900
    Auger Extension $20 $60 $180
    Additional Auger Bit $50 $150 $450
    HP1100 Breaker $350 $1,050 $3,150
    HP1250 Breaker $390 $1,170 $3,500
    HP1500 Breaker $450 $1,350 $4,050
    Hydraulic Thumb $200 $600 $1,800

    Compact track loaders
    Model Net HP Operating Weight Rated Operating Capacity* Available Bucket Widths Day Week 4 Weeks
    TR270 74 HP 8,270 lb 2,700 lb 66" $275 $800 $2,300
    TR270 HF 74 HP 8,270 lb 2,700 lb 66" $315 $875 $2,525
    TR310 74 HP 8,880 lb 3,100 lb 72" $285 $825 $2,315
    TR310 HF 74 HP 8,880 lb 3,100 lb 72" $315 $915 $2,550
    TR340 90 HP 10,000 lb 3,400 lb 78" $320 $945 $2,825
    TR340 HF 90 HP 10,000 lb 3,400 lb 78" $345 $1,025 $3,050
    TV370 74 HP 9,630 lb 3,700 lb 78" $330 $975 $2,750
    TV370 HF 74 HP 9,630 lb 3,700 lb 78" $350 $1,015 $2,850
    TV380 90 HP 10,550 lb 3,800 lb 78" $360 $1,075 $2,875
    TV380 HF 90 HP 10,550 lb 3,800 lb 78" $375 $1,150 $2,900
    TV450 90 HP 10,610 lb 4,500 lb 78" $385 $1,200 $2,950
    TV450 HF 90 HP 10,610 lb 4,500 lb 78" $410 $1,275 $3,175
    TV620B 114 HP 16,000 lb 6,200 lb 84" $600 $1845 $4625

    TR = Radial Lift, TV = Vertical Lift, HF = High Flow • Machines equipped with smooth or tooth bucket

    Model Net HP Operating Weight Rated Operating Capacity* Available Bucket Widths Day Week 4 Weeks
    TL6 65 HP 7,780 lb 2,635 lb 60" - 80" $265 $795 $2,200
    TL8 74 HP 8,631 lb 3,010 lb 60" - 80" $285 $825 $2,315
    TL8 HF 74 HP 8,631 lb 3,010 lb 60" - 80" $315 $915 $2,550
    TL10V2 74 HP 10,270 lb 3,600 lb 70" - 90" $325 $950 $2,650
    TL10V2 HF 74 HP 10,270 lb 3,600 lb 70" - 90" $350 $1,015 $2,850
    TL12R2/V2 111 HP 12,590 lb 4,315 lb 76" - 90" $385 $1,200 $2,950
    TL12R2/V2 HF 111 HP 12,590 lb 4,315 lb 76" - 90" $410 $1,275 $3,175
    TB2150CL 114 HP 34,480 lb   18 ft $635 $1835 $5325

    HF = High Flow • Machines equipped with smooth or tooth bucket

    Small Double Drum Roller
    Model Rated HP Operating Weight Drum Width Day Week 4 Weeks
    DV23 35.5 HP 5,270 lb 39.4" $225 $650 $1,895
    DV26 31 HP 5,842 lb 47.2” $285 $825 $2,395
    DV36 43.5 HP 8,290 lb 51.2” $320 $925 $2,695
    DV45 40 HP 10,296 lb 54.3" $450 $1,305 $3,785
    Model Rated HP Operating Weight Drum Width Day Week 4 Weeks
    RD12A 16.6 HP 2,490 lb 35.4" $204 $595 $1,725

    Mulchers
    Model Overall Width Weight Flow Range Day Week 4 Weeks
    BH74SS 5 ft 1 in 2,626 lb 24 - 45 gpm $500 $1,700 $4,500

    Midi Excavator
    Model Operating Net HP Weight Max Dig Depth Day Week 4 weeks
    CX75C SR 55.2 HP 16,200 lb 13' 7" $375 $1,150 $3,495
    CX80C 55.2 HP 18,800 lb 13' 9" $400 $1,200 $3,600
    Model Operating Net HP Weight Max Dig Depth Day Week 4 weeks
    TB280FR 69.2 HP 18,810 lb 14' 11” $400 $1,200 $3,600
    TB290 69.2 HP 18,630 lb 15' $400 $1,200 $3,600
    TB2150 114 HP 34,480 lb 18"

      Request a Quote

      [anr_nocaptcha g-recaptcha-response]